Multi Brush
Multifunctional surface treatment system for dry or wet cleaning, brushing,
dedusting, tufting and emerising of all web-like fabrics such as textiles
and carpets, metal foils, paper, non-wovens, etc.
Easy integration into existing line concepts, with various brush arrangements
and brush table shapes.
Deliverable as complete, pre-assembled, hard-wired modules in
three sizes:
Multi Brush®1600 - Multi
Brush®2000 - Multi
Brush®2800
Multi Brush® 1600 for flocked fabrics
height = 2.400 mm
width = 800 mm |
- Standard working width 1,600 mm
- For single-sided fabric treatment
- Galvanically coated steel base frame
- 3 full-body pile brushing rollers, nylon bristles,
- 0.5 mm dia., bristle height 30 mm
- Pile brushes working against pointed tables with stainless steel rollers
- Drive 3x 2.2 kW, 400 V
- Pile brush speed individually steplessly variable via frequency converter;
rotational direction of each brush individually selectable
- Angle of brush tables adjustable via handwheel; includes adjustment angle
indicator
- Ionisation unit retrofittable
- Optionally, with driven draw roller (including spreading roller)
- Optionally, pile brushes also driven via toothed drive belts using only
one drive motor
- Particle extraction over each brushing roller by means of central medium
pressure fan with sheet steel impeller and noise control encapsulation; power
consumption individually adaptable to the particles requiring extraction;
air exhaust capacity 12,600 m3/h; integral silencer at the discharge
end
- Filter unit with 24 filter bags (300 mm dia., 2,800 mm length) and 4 bag
fitting nozzles
- Scope of supply includes all connecting piping for the particle extraction
as well as 100 polyethylene bags for the filtered particles.
|
Multi Brush® 2000 for flocked
fabrics
height = 2.400 mm
width = 800 mm |
- Standard working width 2,000 mm
- Galvanically coated steel base frame
- 3 full-body pile brushing rollers, nylon bristles
- 0.4 mm dia., bristle height 30 mm
- 3 back-brushing rollers with full-body bristles,
nylon bristles 0.3 mm dia., bristle height 30 mm
- Pile brushes working against pointed tables with stainless steel rollers
- Back-brushing rollers working against round tables (ground and chrome-plated)
- Pile brush speed individually steplessly variable via frequency converter;
rotational direction of each brush individually selectable
- All brush tables individually adjustable via handwheel; includes adjustment
angle indicator
- Drive motors 2.2 kW, 220 / 400 V for pile and back-brushing rollers
- Speed individually steplessly variable via frequency converter
- Pile and back-brushing rollers interlinked via maintenance-free toothed
belt drives
- Fabric transport roller with worm gear motor
1.5 kW, 220 / 400 V
- Ionisation unit retrofittable
- Particle extraction over each brushing roller by means of central medium
pressure fan with sheet steel impeller
- High-performance galvanised sheet steel separator for particles, including
condensate drainage
- Scope of supply includes all connecting piping for the particle extraction
as well as pipe fittings, flanges and bolts.
|
Multi Brush® 2800 for velours,
carpets
height = 2.400 mm
width = 800 mm |
- Standard working width 2,000 mm
- For double-sided fabric treatment
- Galvanically coated steel base frame
- 2 full-body pile brushing rollers, 110 mm dia.,
nylon bristles 0.4 mm dia., bristle height 30 mm
- 1 back-brushing roller with full-body bristles,
nylon bristles 0.2 mm dia., bristle height 30 mm
- Pile brushes working against pointed tables with stainless steel rollers
- Back-brushing rollers working against round tables (ground and chrome-plated)
- All brush table angles individually adjustable via handwheel; includes
adjustment angle indicator
- Drive motors 2.2 kW, 220 / 400 V for pile and back-brushing rollers; all
brushing rollers interlinked via maintenance-free toothed belt drives
- Speed individually variable via frequency-controlled motor
- Joint rotational direction of the pile and back-brushing rollers freely
selectable
- Ionisation unit retrofittable
- Particle extraction over each brushing roller by means of central medium
pressure fan with sheet steel impeller
- Scope of supply includes all connecting piping for the particle extraction
as well as pipe fittings, flanges and bolts
|
