Multi Brush

Multifunctional surface treatment system for dry or wet cleaning, brushing, dedusting, tufting and emerising of all web-like fabrics such as textiles and carpets, metal foils, paper, non-wovens, etc.

Easy integration into existing line concepts, with various brush arrangements and brush table shapes.

Deliverable as complete, pre-assembled, hard-wired modules in three sizes:
Multi Brush^®1600 -  Multi Brush^®2000 -  Multi Brush^®2800

height = 2.400 mm
width = 800 mm

• Standard working width 1,600 mm
• For single-sided fabric treatment
• Galvanically coated steel base frame
• 3 full-body pile brushing rollers, nylon bristles,
• 0.5 mm dia., bristle height 30 mm
• Pile brushes working against pointed tables with stainless steel rollers
• Drive 3x 2.2 kW, 400 V
• Pile brush speed individually steplessly variable via frequency converter; rotational direction of each brush individually selectable
• Angle of brush tables adjustable via handwheel; includes adjustment angle indicator
• Ionisation unit retrofittable
• Optionally, with driven draw roller (including spreading roller)
• Optionally, pile brushes also driven via toothed drive belts using only one drive motor
• Particle extraction over each brushing roller by means of central medium pressure fan with sheet steel impeller and noise control encapsulation; power consumption individually adaptable to the particles requiring extraction; air exhaust capacity 12,600 m³/h; integral silencer at the discharge end
• Filter unit with 24 filter bags (300 mm dia., 2,800 mm length) and 4 bag fitting nozzles
• Scope of supply includes all connecting piping for the particle extraction as well as 100 polyethylene bags for the filtered particles.

height = 2.400 mm
width = 800 mm

• Standard working width 2,000 mm
• Galvanically coated steel base frame
• 3 full-body pile brushing rollers, nylon bristles
• 0.4 mm dia., bristle height 30 mm
• 3 back-brushing rollers with full-body bristles,
  nylon bristles 0.3 mm dia., bristle height 30 mm
• Pile brushes working against pointed tables with stainless steel rollers
• Back-brushing rollers working against round tables (ground and chrome-plated)
• Pile brush speed individually steplessly variable via frequency converter; rotational direction of each brush individually selectable
• All brush tables individually adjustable via handwheel; includes adjustment angle indicator
• Drive motors 2.2 kW, 220 / 400 V for pile and back-brushing rollers
• Speed individually steplessly variable via frequency converter
• Pile and back-brushing rollers interlinked via maintenance-free toothed belt drives
• Fabric transport roller with worm gear motor
  1.5 kW, 220 / 400 V
• Ionisation unit retrofittable
• Particle extraction over each brushing roller by means of central medium pressure fan with sheet steel impeller
• High-performance galvanised sheet steel separator for particles, including condensate drainage
• Scope of supply includes all connecting piping for the particle extraction as well as pipe fittings, flanges and bolts.

height = 2.400 mm
width = 800 mm

• Standard working width 2,000 mm
• For double-sided fabric treatment
• Galvanically coated steel base frame
• 2 full-body pile brushing rollers, 110 mm dia.,
  nylon bristles 0.4 mm dia., bristle height 30 mm
• 1 back-brushing roller with full-body bristles,
  nylon bristles 0.2 mm dia., bristle height 30 mm
• Pile brushes working against pointed tables with stainless steel rollers
• Back-brushing rollers working against round tables (ground and chrome-plated)
• All brush table angles individually adjustable via handwheel; includes adjustment angle indicator
• Drive motors 2.2 kW, 220 / 400 V for pile and back-brushing rollers; all brushing rollers interlinked via maintenance-free toothed belt drives
• Speed individually variable via frequency-controlled motor
• Joint rotational direction of the pile and back-brushing rollers freely selectable
• Ionisation unit retrofittable
• Particle extraction over each brushing roller by means of central medium pressure fan with sheet steel impeller
• Scope of supply includes all connecting piping for the particle extraction as well as pipe fittings, flanges and bolts